User Manual

Reference Manual
Reference
128
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
File
File Select
Save
Load
File Job
Delete
Rename
New Directory
Format
Copy
Appendix
Basic Structure
When loading the “All” file, you can load only a specific data (Bank or Program) as well as all the data included in the
“All” file. Select the “All” file then press the [ENTER] button or Cursor [R] button to call up the display which lets you
select one of the following items.
All
When this is selected, all the data will be loaded.
All without system
When this is selected, all the data except for the Utility settings will be loaded.
Voice
When this is selected, press the [ENTER] button to load all User Voices or press the Cursor [R] button to call up the
Bank Select display.
Performance
When this is selected, press the [ENTER] button to load all User Performances or press the Cursor [R] button to call up
the Bank Select display.
All Arpeggio
When this is selected, all the Arpeggio data will be loaded.
Seq Chain
When this is selected, all the Chain data of the Sequence Play mode will be loaded.
Bank Select display
From this display that appears when Voice data and Performance data are loaded, you can select the Load source and
Load destination of the Bank.
On the Load source display, select whether all the Voices of the Bank are loaded or just a specific program. Move the
cursor to the desired Bank to be loaded, then press the [ENTER] button to call up the Load destination display. Press
the Cursor [R] button on the Load source display to call up the Program selection display.
Program Selection display
On the Load source selection display, select the program to be loaded, then press the [ENTER] button or Cursor [R]
button to call up the Load destination selection display. Select the Bank and Number then press the [ENTER] button to
open the confirmation display.
NOTE:
You can select a program by using the BANK [INC]/[DEC] buttons, [A] – [H] buttons, and Number [1] – [16] buttons in the
“Bank” or “Number” section when the [PART]/[MUTE]/[SOLO] lamps are turned off. You can select the Voice corresponding to
the current Part by pressing the [CATEGORY SEARCH] button.
NOTE: When this display is shown, you can hear the original sound at the destination by pressing the [EDIT] button to call up the
Compare mode. Pressing the [EDIT] button again will exit from the Compare mode.
Loading an “All” file
Load source selection display Load destination selection display
Load source selection display Load destination selection display