User Manual

Reference Manual
Reference
110
Voice
Performance
Multi
SEQ Play
Master
Remote
File
Audio Rec/Play
Utility
Multi
Play
Mixing
Edit Select
Common Edit
Name
Arpeggio
Controller
Effect
Parameter
Master EQ
A/D Out
A/D FX
Parameter
Part Edit
Voice
Play Mode
Arpeggio
Arp Edit
Arp 1-5 Type
Filter/EG
3 Band EQ
Rcv Sw
FX Send
Job Select
Recall
Bulk
Copy
Initialize
Basic Structure
Appendix
Multi Job
The Multi Job mode features convenient data initialization and archiving tools.
If you are editing a Multi but you have not stored it before switching to another Multi, the edits you have made will be
cleared. If this happens, you can use the Recall function to restore the Multi with your latest edits intact. Press the
[ENTER] button to execute the Recall.
This function lets you send your edited parameter settings for the currently selected Multi to a computer or another MIDI
device for data archiving. Press the [ENTER] button to execute the Bulk Dump.
NOTE:
You can execute this function by holding down the [SHIFT] button and pressing the [MULTI/SEQ PLAY] button.
NOTE: In order to execute Bulk Dump, you will need to set the correct MIDI Device Number. For information on the MIDI Device
Number setting, refer to page 138.
Copy Select display
Part
This convenient operation lets you copy Common Edit and Part Edit settings of
a certain Multi to the currently edited Multi. This is useful if you are creating a
Multi and wish to use some parameter settings of another Multi.
NOTE:
When this display is shown, you can hear the original sound at copy source by
pressing the [EDIT] button to call up the Compare mode. Pressing the [EDIT]
button again will exit from the Compare mode.
1 Source Multi
Determines the Multi number to be copied. When “current” is selected, the current Multi is specified as Source Multi. This means that you
can copy the parameter settings from a Part to a different Part within the current Multi. Accordingly, you can copy the parameter settings
from a Part to a different Part of the same Multi.
Settings: Multi number: 001 (A01) – 128 (H16), current
2 Data type of the source
Determines the source data type including the Part number. According to the setting here, the Data type of the destination below will be
automatically set to the appropriate item.
Settings: common, part 1 – 16, A/D
3 Data type of the destination
Determines the destination data type including the Part number. According to the setting here, the Data type of the destination below will
be automatically set to the appropriate item.
Settings: common, part 1 – 16, A/D
Operation
[MULTI/SEQ PLAY]  Select Multi program  [JOB]  Multi Job Select display
1 Recall
2 Bulk (Bulk Dump)
3 Copy
1
2
4
3