Owner`s manual

40 En
SIRIUS Satellite Radio™ tuning (U.S.A. model only)
You can use the Parental Lock feature to limit the access
to the desired SIRIUS Satellite channels. This unit
automatically skips the locked channels when this unit is
in the All Channel Search mode or Category Search mode
and you search for a channel by pressing JTUNING/
CH l / h (or fTUN./CH k / n).
You can set the Parental Lock code number (PIN) and
select the channels to be locked.
1 Press rOPTION on the remote control.
The OPTION menu is displayed on the front panel
display and video monitor.
2 Press kCursor n repeatedly to select
“Parental Lock” and then press kENTER.
3 Enter the desired 4-digit code number by
using the kCursor k / n / l / h.
If you have entered a code number before, enter the
same code number.
4 Press kENTER.
A confirmation screen appears.
Note
If a code number is already registered and you enter the different
number, “Wrong” appears and the screen returns to step 3. Enter
the correct code number.
5 Press kENTER again to confirm the code
number.
“OK” appears and then the SIRIUS Satellite Radio
channel list is displayed.
6 Press kCursor l / h to select a category
of that channel and a channel you want to
lock.
7 Press kCursor k / n to select a channel you
want to lock.
Notes
You can also select a channel by using fCATEGORY l / h or
fTUN./CH k / n.
While the SIRIUS Satellite Radio channel list screen is displayed,
sound of the selected channel is output even the channel is locked.
8 Press kENTER to lock the selected
channel.
A check mark appears next to the locked channel on
the video monitor. You can toggle channel lock and
unlock as you press kENTER.
9 Repeat steps 5 through 7 to lock all the
desired channels.
10 Press kRETURN repeatedly to exit the
“PARENTAL LOCK” screen.
This unit is tuned into the last channel you select in
the PARENTAL LOCK screen. If the channel is
locked, this unit is tuned into “184 SIRIUS Weather
& Emergency” or “000 Sirius ID.
y
If you forget the Parental lock code or want to change it, reset it using
“SR PIN” (see page 64).
If you want to tune in the locked channels, set this unit to
Direct number access mode or preset tuning mode. When
you tune into the locked channel, “LOCKED” appears on
the front panel display and video monitor, “LOCKED”
appears on the front panel display and video monitor and
then the screens change to the Parental Lock code input
screen. Enter the Parental Lock code using the
mNumeric keys. To cancel this operation, press
mENT.
Note
If an incorrect number is entered, “Wrong” appears on the front panel
display or the video monitor and this unit is tuned into the previously
selected channel.
Setting the Parental Lock
Setting the code number and the locking
channels
The entered code number is needed for tuning in the
channel or unlocking the channel. Write it down in the
space provided below.
Code number: ________________________________
PARENTALLOCK
CAT:Pop1/3
[ENTER]:Lock/Unlock
002:TheBlend
003:SiriusXMLove
004:The40son4
[]/[]:Channel
005:The50son5
[]/[]:Category
[
[
001:SiriusHits1
p[
Channel
category
Page number in the category
Tuning into the locked channels
PARENTALLOCK
CAT:Pop1/3
[ENTER]:Lock/Unlock
002:TheBlend
003:SiriusXMLove
004:The40son4
[]/[]:Channel
005:The50son5
[]/[]:Category
[
[
001:SiriusHits1
p[
Locked channel
PIN: