Stereo Receiver User Manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 80
Network
Configures the network settings.
■ Information
Displays the network information on the unit.
■ IP Address
Configures the network parameters (such as IP address).
❑ DHCP
Select whether to use a DHCP server.
Settings
■ Manual network settings
1
Set “DHCP” to “Off”.
2
Use the cursor keys (q/w) to select a parameter type.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
4
To exit from the menu, press SETUP.
Status The connection status of the NETWORK jack
MAC Address MAC address
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
vTuner ID The ID of the Internet radio (vTuner)
Setup
Speaker
HDMI
Sound
ECO
Function
Network
Language
Information
IP Address
MAC Address Filter
DMC Control
Network Standby
Network Name
Network Update
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
On (default)
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.