Owner`s manual

ManualsBrandsYamaha ManualsHome AudioRX-Z11 - AV Receiver

Connections

37 En

Preparation

■ Connecting a multi-format player or an external decoder

This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for

discrete multi-channel input from a multi-format player, external decoder, sound processor or pre-amplifier.

If you set “Input Channels” to “8ch” in “Multi CH Assign” (see page 98), you can use the input jacks assigned as “Front Input” in “Multi CH

Assign” (see page 98) together with the MULTI CH INPUT jacks to input 8-channel signals.

Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right

outputs to the left and right input jacks for the front and surround channels.

• When you select the component connected to the MULTI CH INPUT jacks as the input source (see page 54), this unit automatically turns off the digital

sound field processor, and you cannot select sound field programs.

• The audio signals input at the CENTER and SUBWOOFER MULTI CH INPUT jacks are mixed down to the left and right headphone channels.

• This unit redirects the audio signals input at the CENTER and/or SUBWOOFER MULTI CH INPUT jacks to the front left and right speaker channels when

you set “Center” and/or “Configuration” in “Speaker Set” to “None” (see page 100). We recommend that you connect at least a 5.1-channel speaker system

before using this feature.

For 6-channel input For 8-channel input

* The analog audio input jacks assigned as “Front Input” in “Multi CH

Assign” (see page 98).

Notes

MULTI CH INPUT

FRONT (6CH) CENTER

SUBWOOFERSURROUNDSB (8CH)

LR L R

Subwoofer out

Multi-format player/

External decoder

Center out

Surround out

Front out

Note