manual

En 80
■ iPod Interlock
Selects whether to control this unit in conjunction with operations of the iPod connected
to the iPod wireless system.
Input sources
DOCK (iPod)
• This function is available only when an iPod wireless system is connected to this unit.
❑ Power & Input
Selects whether to control the power and input source selection of this unit in
conjunction with iPod operations.
Settings
• When “Power & Input” is set to “On”, the iPod connected to the iPod wireless system is charged regardless
of the “Standby Charge” setting (p.79).
❑ Volume
Selects whether to control the volume of this unit in conjunction with iPod operations.
Settings
■ Video Out
Selects a video to be output with the audio input source.
Input sources
TUNER, (network sources), USB
Settings
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Input source
PC
Settings
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of this unit from DMCs (Windows Media Player 12,
etc.) on the same network.
On (default)
Enables power and input interlocking controls. When you start
playback of the iPod, this unit turns on and “DOCK” is selected as the
input source. When you stop playback, this unit enters standby mode
after a short time.
Off Disables power and input interlocking controls.
On (default)
Enables volume interlocking controls. When you adjust the iPod
volume, the volume of the unit is also adjusted.
Off Disables volume interlocking control.
Off (default) Does not output videos.
HDMI1~7, AV1~6,
V-AUX
Outputs videos input through the corresponding video input jacks.
Disable Does not allow DMCs to control playback.
Enable (default) Allows DMCs to control playback.