Operation Manual

41 En
Setting the option menu for each input source (OPTION menu)
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
■ FM Mode
Sets FM broadcasting receiving mode.
■ Auto Preset
Automatically detects radio stations in the FM frequency
band and registers them as preset stations (see page 31).
■
Clear Preset
Clears the preset stations (see page 32).
■
PTY Seek
Searches a station that is broadcasting a program under the
desired category from the preset stations while using the
Radio Data System (see page 33).
■
EON
Enables you to receive the EON (enhanced other network)
data service of the Radio Data System (see page 33).
■
Shuffle
Changes the shuffle playback style (see page 36).
■
Repeat
Changes the repeat playback style (see page 36).
■
Connect / Disconnect
Switches communication with a Bluetooth component on
and off (see page 37).
■
Pairing
Performs pairing of this unit and a Bluetooth component
(see page 37).
■
Video Out
When the multi-channel input is selected, outputs a signal
input from another terminal to the video monitor. See
“Outputting a video signal input from another input source
during reproducing a multi-channel audio signal” on this
page.
When “MULTI CH” is selected as the input source, a
video signal input from another terminal can be output to
the video monitor. For example, even if an audio and
video component such as a DVD player that does not
support a multi-channel digital audio output, the video
signal can be output to the video monitor while
reproducing a multi-channel analog audio signal.
1 Rotate the RINPUT selector (or press
eMULTI) to change the input source to
“MULTI CH.”
2 Press rOPTION on the remote control.
The OPTION menu appears.
3 Press kCursor k / n to display “Video Out,”
and press kENTER.
The following screen appears.
4 Press kCursor l / h to select a video input
jack to which a component to be used as a
video input source is connected.
– AV1-2 (COMPONENT VIDEO jacks)
– AV3-6 (VIDEO jack)
– V-AUX (VIDEO jack)
– Off (no video input)
5 To end the setting, press rOPTION.
Input source: TUNER
Choices: Stereo*/Mono
Stereo Receives in stereo mode.
Mono Receives in monaural mode. You can get a
better reception in monaural mode.
Input source: TUNER
Input source: TUNER
Input source: TUNER
Input source: TUNER
Input source: iPod (DOCK)
Choices: Off*/Songs/Albums
Input source: iPod (DOCK)
Choices: Off*/One/All
Input source: Bluetooth (DOCK)
Input source: Bluetooth (DOCK)
Input source: MULTI CH
Choices: AV1 to 6/V-AUX/Off*
Outputting a video signal input from
another input source during
reproducing a multi-channel audio
signal
MULTI CHOPTION
Video Out;;;;Off
[Return]:Return
[]/[]:Video
[ [