AV Receiver Owner's Manual

51
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
REMOTE CONTROL FEATURES
CLEAR
CLEAR
CLEAR
Clearing renamed source names,
and setup manufacturer codes
1 Press an input selector button or Å/ı/Ç to
select the component control for which you
want to clear the name, function or
manufacturer code.
2 Press CLEAR by using a ballpoint pen or
similar object.
Note
• If you do not press any button within 30 seconds after step 2,
the clearing process is canceled. If this happens, start over from
step 1.
3 Press u / d to select the clear mode.
The mode is shown in the display window in the
following order:
4 Press and hold CLEAR again for about 3
seconds.
“C:OK” appears in the display window.
Note
•“C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
5 Press CLEAR to exit from the clearing mode.
Note
•“ERROR” appears in the display window when pressing
buttons other than indicated in each step, or more than one
button at once.
PHONO
POWER SLEEP
STANDBY 6CH INPUT
SYSTEM
V
-
AUX
A B C
D
-
TV/CBL VCR2/DVRVCR 1 DVD
MD/CD-R
TUNER
CD
Clears all renamed source names
in the display window.
Clears all setup manufacturer
codes and renamed source
names. This returns to the factory
settings.
TV VOL
PRESET PRESET
TV MUTE
TV VOL
SELECT
CHCH
+
+
–
–
(L: name of a component) Clears
setup manufacturer code for the
component control.
0109V730_48-53_EN(U) 12/27/01, 2:18 PM51