Operation Manual

90 En

Remote control features

■ Default macro functions

You can turn on some components (including Yamaha components) connected to this unit by connecting them to the AC OUTLETS

on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component.

For details, refer to the operating instructions for the connected component.

When the remote control code for your TV is set up for either DTV/CBL or PHONO (see page 85), you can turn on the power of your

TV without selecting an input source. The remote control code set up for DTV/CBL takes priority over the one for PHONO.

When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.

Playback can be started for any Yamaha remote control-compatible CD player, CD recorder, DVD player, or DVD recorder. When

using macros to operate other components, you will need to program the play button on the input area of that component (see

page 87) or set a remote control code (see page 85).

Pressing

macro button

To automatically transmit these signals in order

First Second Third

—

(*1)

—

(MD/CD-R area) (*4)

(CD area) (*4)

—

(DVR area) (*4)

(VCR area) (*4)

(DVD area) (*4)

STANDBY STANDBY

POWER

(*1)

POWER

(*2)

PHONO

POWER

PHONO

MULCH CH IN

AUX/DOC

TUNE

(*3)

MD/CD-

CD CD

DTV/CBL DTV/CBL

DVR DVR

VCR VCR

DVD DVD