Owner's Manual

SOUND FIELD PROGRAMS

SOUND FIELD

PROGRAMS

English

The “PRO LOGIC IIx Music”, “PRO LOGIC II Music”, and “DTS Neo:6 Music” parameters can be set only when “SUR.

STANDARD” is selected. Set the component selector switch to AMP and then press STANDARD on the remote control repeatedly to

select “SUR. STANDARD” (see page 49).

PRO LOGIC IIx Music

PRO LOGIC II Music

PANORAMA

Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround

speakers as well as the front speakers for a wraparound effect.

Choices: OFF, ON

PRO LOGIC IIx Music

PRO LOGIC II Music

DIMENSION

Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards

the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front)

Initial setting: STD (standard)

PRO LOGIC IIx Music

PRO LOGIC II Music

CENTER WIDTH

Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output

completely towards the center speaker or towards the front left and right speakers. A larger value

moves the center channel output towards the front left and right speakers.

Control range: 0 (center channel sound is output only from the center speaker) to

7 (center channel sound is output only from the front left and right speakers)

Initial setting: 3

DTS Neo:6 Music

C.IMAGE

DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the

center channel to make the center channel more or less dominant as necessary.

Control range: 0.0 to 1.0

Initial setting: 0.3

Sound field parameter Features