Operation Manual
Table Of Contents
- English
- INTRODUCTION
- PREPARATION
- BASIC OPERATION
- ADVANCED OPERATION
- SET MENU
- Set menu list
- Adjusting the items on the set menu
- SOUND 1 SPEAKER SET (speaker mode settings)
- SOUND 2 SP DISTANCE (speaker distance)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (dynamic range)
- SOUND 5 CENTER GEQ (center graphic equalizer)
- SOUND 6 HP TONE CTRL (headphone tone control)
- INPUT 1 I/O ASSIGN (input/output assignment)
- INPUT 2 INPUT MODE (initial input mode)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (memory guard)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- REMOTE CONTROL FEATURES
- SETTING THE SPEAKER LEVELS
- SET MENU
- ADDITIONAL INFORMATION
- LIST OF MANUFACTURER’S CODES
- Français
- INTRODUCTION
- PRÉPARATIONS
- FONCTIONS DE BASE
- FONCTIONS AVANCÉES
- SET MENU
- Postes du menu de configuration
- Réglage des paramètres du menu de configuration
- SOUND 1 SPEAKER SET (réglages concernant les enceintes)
- SOUND 2 SP DISTANCE (distance aux enceintes)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (dynamique)
- SOUND 5 CENTER GEQ (égaliseur graphique central)
- SOUND 6 HP TONE CTRL (réglage de la tonalité pour le casque)
- INPUT 1 I/O ASSIGN (attribution des entrées/sorties)
- INPUT 2 INPUT MODE (mode d’entrée)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (secours de la mémoire)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- FONCTIONS DU BOÎTIER DE TÉLÉCOMMANDE
- RÉGLAGE DU NIVEAU DE SORTIE DES ENCEINTES
- SET MENU
- INFORMATIONS COMPLÉMENTAIRES
- LISTE DES CODES FABRICANTS
- Deutsch
- EINLEITUNG
- VORBEREITUNG
- GRUNDLEGENDE BEDIENUNGSVORGÄNGE
- WEITERFÜHRENDE BEDIENUNGSVORGÄNGE
- EINSTELLMENÜ (SET MENU)
- Einstellmenü-Liste
- Einstellung der Menüpositionen
- SOUND 1 SPEAKER SET (Einstellungen des Lautsprechermodus)
- SOUND 2 SP DISTANCE (Lautsprecher-Abstand)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (Dynamikbereich)
- SOUND 5 CENTER GEQ (Center-Graphik-Equalizer)
- SOUND 6 HP TONE CTRL(Kopfhörer-Klangregelung)
- INPUT 1 I/O ASSIGN (Eingangs Ausgangszuordnung)
- INPUT 2 INPUT MODE (anfänglicher Eingangsmodus)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (Speicherschutz)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- MERKMALE DER FERNBEDIENUNG
- EINSTELLUNG DER LAUTSPRECHERPEGEL
- EINSTELLMENÜ (SET MENU)
- ZUSÄTZLICHE INFORMATIONEN
- LISTE DER HERSTELLER-CODES
- Svenska
- INLEDNING
- FÖRBEREDELSER
- GRUNDLÄGGANDE ANVÄNDNING
- AVANCERAD ANVÄNDNING
- INSTÄLLNINGSMENYN SET MENU
- Lista över inställningsmenyer
- Justering av poster på inställningsmenyn
- SOUND 1 SPEAKER SET (högtalarinställningar)
- SOUND 2 SP DISTANCE (högtalaravstånd)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (dynamiskt omfång)
- SOUND 5 CENTER GEQ (grafisk equalizer för mitthögtalaren)
- SOUND 6 HP TONE CTRL (tonkontroll för hörlurarna)
- INPUT 1 I/O ASSIGN (tilldelning av ingångar/utgångar)
- INPUT 2 INPUT MODE (tidigare ingångsläge)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (minneslåsning)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- FJÄRRKONTROLLENS FUNKTIONER
- INSTÄLLNING AV HÖGTALARNIVÅ
- INSTÄLLNINGSMENYN SET MENU
- YTTERLIGARE INFORMATION
- LISTA ÖVER TILLVERKARKODER
- Italiano
- INTRODUZIONE
- PREPARATIVI
- COLLEGAMENTI
- Prima di collegare dei componenti
- Collegamento di componenti video
- Collegamento di componenti audio
- Collegamento delle antenne [RX-V640RDS]
- Collegamento di un amplificatore esterno
- Collegamento ad un decodificatore esterno
- Collegamento dei diffusori
- Collegamento dei cavi di alimentazione
- Attivazione dell’alimentazione
- IMPOSTAZIONI BASE DEL SISTEMA
- COLLEGAMENTI
- FUNZIONAMENTO DI BASE
- FUNZIONAMENTO AVANZATO
- SET MENU
- Lista voci dei menu di impostazione
- Regolazione delle voci del menu di impostazione
- SOUND 1 SPEAKER SET (impostazioni modo diffusore)
- SOUND 2 SP DISTANCE (distanza diffusori)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (gamma dinamica)
- SOUND 5 CENTER GEQ (equalizzatore grafico centrale)
- SOUND 6 HP TONE CTRL (controllo tono cuffia)
- INPUT 1 I/O ASSIGN (assegnazione ingressi ed uscite)
- INPUT 2 INPUT MODE (modo ingresso iniziale)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (protezione memoria)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- CARATTERISTICHE DEL TELECOMANDO
- IMPOSTAZIONE DEL LIVELLO DEI DIFFUSORI
- SET MENU
- INFORMAZIONI ADDIZIONALI
- LISTA DEI CODICI DEL FABBRICANTE
- Español
- INTRODUCCIÓN
- PREPARACIÓN
- FUNCIONAMIENTO BÁSICO
- FUNCIONAMIENTO AVANZADO
- SET MENU (MENÚ DE AJUSTE)
- Lista del menú de ajuste
- Ajuste de los elementos del menú de ajuste
- SOUND 1 SPEAKER SET (ajustes para los modos de altavoces)
- SOUND 2 SP DISTANCE (distancia de altavoces)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (gama dinámica)
- SOUND 5 CENTER GEQ (ecualizador gráfico para canal central)
- SOUND 6 HP TONE CTRL (control de tono de los auriculares)
- INPUT 1 I/O ASSIGN (asignación de entrada/salida)
- INPUT 2 INPUT MODE (modo de entrada inicial)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (protección de la memoria)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- CARACTERÍSTICAS DEL MANDO A DISTANCIA
- AJUSTE DEL NIVEL DE LOS ALTAVOCES
- SET MENU (MENÚ DE AJUSTE)
- INFORMACIÓN ADICIONAL
- LISTA DE CÓDIGOS DE FABRICANTES
- Nederlands
- INLEIDING
- VOORBEREIDINGEN
- BASISBEDIENING
- GEAVANCEERDE BEDIENING
- SET MENU (INSTELMENU)
- Instelmenu lijst
- Instellingen wijzigen via het instelmenu
- SOUND 1 SPEAKER SET (luidspreker instellingen)
- SOUND 2 SP DISTANCE (luidspreker afstand)
- SOUND 3 LFE LEVEL
- SOUND 4 D. RANGE (dynamisch bereik)
- SOUND 5 CENTER GEQ (midden grafische equalizer)
- SOUND 6 HP TONE CTRL (hoofdtelefoon toonregeling)
- INPUT 1 I/O ASSIGN (ingang/uitgang toewijzing)
- INPUT 2 INPUT MODE (begininstelling ingangsfunctie)
- OPTION 1 DISPLAY SET
- OPTION 2 MEM. GUARD (geheugen vergrendeling)
- OPTION 3 AUDIO MUTE
- OPTION 4 ZONE SET
- KENMERKEN AFSTANDSBEDIENING
- INSTELLEN VAN DE WEERGAVENIVEAUS VAN DE LUIDSPREKERS
- SET MENU (INSTELMENU)
- AANVULLENDE INFORMATIE
- LIJST MET FABRIKANTENCODES
54
Problem
Only the speaker on
one side can be
heard.
No sound from the
effect speakers.
No sound from the
center speaker.
No sound from the
rear speakers.
No sound from the
subwoofer.
Poor bass
reproduction.
Cause
Incorrect cable connections.
The sound effect is switched off.
A Dolby Surround, Dolby Digital or DTS
decoding DSP program is being used with
material not encoded with Dolby
Surround, Dolby Digital or DTS.
A digital signal with a sampling
frequency greater than 48 kHz is input to
this unit.
The output level of the center speaker is
set to minimum.
“SOUND 1A CENTER” on the set menu
is set to NON.
One of the Hi-Fi DSP programs (1 to 4)
has been selected (except for 6ch Stereo).
The source encoded with a Dolby Digital
or DTS signal does not have a center
channel signal.
The output level of the rear speakers is set
to minimum.
A monaural source is being played with
program 9.
“SOUND 1E BASS” on the set menu is
set to MAIN when a Dolby Digital or
DTS signal is being played.
“SOUND 1E BASS” on the set menu is
set to SWFR or MAIN when a 2-channel
source is being played.
The source does not contain low bass
signals (90 Hz and below).
“SOUND 1E BASS” on the set menu is
set to SWFR or BOTH and your system
does not include a subwoofer.
The speaker mode settings (main, center,
rear, or rear center) on the set menu does
not match your speaker configuration.
Remedy
Connect the cables properly. If the problem persists,
the cables may be defective.
Press STEREO/EFFECT to turn it on.
Select another DSP program.
Raise the level of the center speaker.
Select the appropriate mode for your center speaker.
Select another DSP program.
Raise the output level of the rear speakers.
Select another DSP program.
Select SWFR or BOTH.
Select BOTH.
Select MAIN.
Select the appropriate position for each speaker based
on the size of the speakers in your configuration.
Refer to
page
16
–
25 – 30
–
50
41
25 – 30
–
50
25 – 30
42
42
–
42
41 – 42
TROUBLESHOOTING
0110RX-V640_51-59_EN-GB.p65 03.2.12, 4:56 PM54