manual

Quick start guide
9 En
English
INTRODUCTION
Case C: “I want to listen to a music program from
the FM radio station...”
Press
F
SCENE 4 (or
F
SCENE 4) to select “Radio
Listening”.
• To use the “Radio Listening” template (Case C), you must
tune into the desired radio station in advance. See pages 38
to 40 for tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 26 for details.
■ After using this unit...
Press
1
STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. In the standby mode,
this unit consumes a small amount of power in order to
receive infrared signals from the remote control. To turn
on this unit from the standby mode, press
1
STANDBY/
ON (or GSTANDBY). See page 19 for details.
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
Notes
Note
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
☞ P. 26
• Creating your original SCENE templates
☞ P. 29
■ Using various input sources
• Basic controls of this unit
☞ P. 30
• Enjoying FM/AM radio programs
☞ P. 38
• Enjoying XM Satellite Radio programs
☞ P. 41
• Using your iPod with this unit.
☞ P. 46
■ Using various sound features
• Using various sound field programs
☞ P. 35
• Using the pure direct mode for the high
fidelity sound
☞ P. 32
• Customizing the sound field programs
☞ P. 37
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room (AUTO
SETUP)
☞ P. 22
• Manually adjusting various parameters of
this unit
☞ P. 49
• Setting the remote control
☞ P. 59
• Adjusting the advanced parameters
☞ P. 64
■ Additional features
Automatically turning off this unit
☞ P. 34