Owner`s manual

84
ZONE 2/ZONE 3
The supplied remote control can be used to control
Zone 2/Zone 3. You can even select the input source and
control components located in the main room directly
from the second/third room regardless of the listening
condition in the main room.
■ To enable Zone mode on the remote
control
You will be able to switch the remote control mode from
one room to another, and use the input selector,
STANDBY, SYSTEM POWER, MUTE and
VOLUME +/– to control the selected room.
1 Set REC OUT/ZONE 2 on the front panel to
SOURCE/REMOTE.
2 Repeat steps 1 through 3 of the procedure in
“Setting remote control codes” on page 71.
3 Press l / h to select “L;AMP”.
4 Press ENTER.
“2000” appears in the display window.
5 Enter the code number “2001” or “2003”.
For details, see page 72.
6 Press ENTER to set the number.
“OK” appears in the display window if setting was
successful.
7 Press LEARN to complete the Zone setup.
The remote control will be able to operate this unit
from Zone 2 or Zone 3.
■ To control Zone 2/Zone 3
1 Press SELECT k repeatedly to display
“ZONE 2” or “ZONE 3” in the display window.
2 Press SYSTEM POWER to turn Zone 2 or
Zone 3 power on.
3 Press an input selector button to select the
input source you want to listen to in the
second/third room.
The display window shows “2: name of selected
input” or “3: name of selected input” if the remote
control is in the Zone 2/Zone 3 mode.
Signals input at V-AUX and PHONO jacks cannot be sent to
Zone 2/Zone 3.
4 You can control the unit from Zone 2 or Zone
3 by using the input selector, STANDBY,
SYSTEM POWER, MUTE and VOLUME +/–
buttons.
* VOLUME +/– can be used only when Zone2 Volume or
Zone3 Volume is set to “Variable” in the GUI menu
(see page 67).
Controlling Zone 2/Zone 3 using
the remote control
SOURCE/
REMOTE
REC OUT/ZONE 2
MD/TAPEDVD
DTV
CBL/SAT
VCR 1
CD-R
TUNER
CD
DVR/
VCR 2
ENTER
LEARN
Note
SELECT
or
DTV DVR/VCR2VCR 1 DVD
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
SLEEP AUDIO SELECT A B
DTV DVR/VCR2VCR 1 DV D
V
-
AUX
CBL/SAT MD/TAPE
CD-R
PHONO TUNER CD
MULTI CH IN
POWER POWER POWER
SYSTEM
STANDBY
AVTV
SLEEP AUDIO SELECT A B
EXIT
MENU
PURE DIRECT
TOP
TITLE
SELECT
VOL
+
–
CH
+
–
TV VOL
TV MUTE TV INPUT MUTE
+
–
AMP
SOURCE
TV
PRESET
*