Owner's Manual

24
BASIC SETUP
7 Press d to display the SPEAKERS
parameter.
8 Press j / i to select the number of speakers
you connected.
SPEAKERS 6spk
9 Press d to display SET/CANCEL.
10 Press j / i to select the desired setting.
>SET CANCEL
SET To apply the settings you chose in steps
4 through 8.
CANCEL To cancel the setup without making any
changes.
11 Press SELECT to confirm your selection.
If you selected SET, you hear a test tone from each
speaker in turn. “CHECK:TestTone” appears in the
front panel display for a few seconds, then “CHECK:
OK?”.
CHECK:TestTone
CHECK OK? YES
12 Press j / i to select the desired setting.
CHECK OK? YES
YES To complete the setup process if the test tone
levels from each speaker were satisfactory.
NO To proceed to the SP LEVEL speaker level
adjustment menu to balance the level of each
speaker.
13 Press SELECT to confirm your selection.
If you selected NO in step 12, the front speaker level
adjustment display appears in the front panel display.
Choices Display Speakers
2spk
Front L/R
3spk
Front L/R, Center
4spk
Front L/R, Surround L/R
5spk
Front L/R, Center, Surround L/R
6spk
Front L/R, Center, Surround L/R,
Surround back
PRESET/CH
SELECT
LL C R
SL SB SR
LL C R
SL SB SR
LL CR
SL SB SR
LL C R
SL SB SR
LL C R
SL SB
SB
SR
LL C R
SL SB SR
PRESET/CH
SELECT
PRESET/CH
SELECT
PRESET/CH
SELECT
01EN_00_RXV450_EB.book Page 24 Thursday, February 5, 2004 6:17 PM