Owner's Manual

88 En
Graphical user interface (GUI) menu
■ Initial Set (Initial settings)
Audio Select (Default audio input jack select)
Use this feature to designate the default audio input jack
select setting (page 37) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
Decoder Mode (Default decoder mode)
Use this feature to designate the default decoder mode
(page 63) for the input sources when you turn on the
power of this unit.
EXTD Surround (Default extended surround
decoder mode setting)
Use this feature to designate the extended surround
decoder mode (page 64) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
■ Trigger Output (Trigger output)
Use this feature to select the functions of each TRIGGER
OUT jack of this unit.
Trigger Mode (Trigger mode)
Target Zone (Target zone)
This setting is not available when “Trigger Mode” is set to
“Manual”.
Input Level (Input level)
Select the input source and then set the input level applied
to the selected input source.
This setting is available only when “Trigger Mode” is set to
“Source”.
Choice Functions
Auto
Automatically detects the type of audio input
signals and selects the appropriate audio input
jack select setting.
Last
Automatically selects the last audio input jack
select setting used for the connected input
source.
Choice Functions
Auto
Automatically detects the type of input signals
and select the appropriate decoder mode setting.
Last
Automatically selects the last decoder mode
setting used for the connected input source.
Choice Functions
Auto
Automatically detects the input digital audio
signals and activates the appropriate decoder.
Last
Selects the last selected extended surround
decoder mode.
Choice Function
Trigger1
Sets the functions for the TRIGGER OUT 1
jack.
Trigger2
Sets the functions for the TRIGGER OUT 2
jack.
Choice Descriptions
Power
Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected zone is turned on.
Source
Select this setting to send the voltage signals at
the selected TRIGGER OUT jack while the
selected input source is selected.
Manual
Select this setting to send the voltage signals
manually.
Note
Choice Targ et zone
Main
Main zone
Zone2
Zone 2
Zone3
Zone 3
All
Main zone, Zone 2, and Zone 3
Note
Choice Descriptions
High
Sends the voltage when the input source is
selected.
Low
Stops sending the voltage when the input source
is selected.