manual

78 En
Graphical user interface (GUI) screen
Use this feature to reassign digital input/outputs, select the
input signal, rename the inputs, or adjust the level of the
signal input at each input source.
• Some parameters described above may not be available for all
input sources and some parameters are only available for
specific input sources.
• When iPod is stationed in a Yamaha iPod universal dock (such
as YDS-10, sold separately) connected to the DOCK terminal
of this unit, “DOCK” appears in the “Input Select” menu
instead of “V-AUX”. In such cases, the parameters marked with
asterisk (*) in the above table do not appear in the input source
parameter menu.
• When you select “NET/USB” as the input source, selected sub
input source (PC/MCX, NET RADIO or USB) appears in the
Input Select menu. You can set “Volume Trim” for each sub
input source separately.
1 Set the operation mode selector to
D
AMP
and then press
G
SET MENU.
The top display appears.
2 Press 4k / n to select “Input Select” and
then press
4
h.
3 Select the desired input source (CD, DVD,
etc.) and then press
4
h or
4
ENTER to
access and adjust.
Input Select
Input source Parameter
TUNER Volume Trim
Rename
MULTI CH Volume Trim
Rename
Multi CH Assign
BGV
PHONO
CD
CD-R
MD/TAPE
BD/HD DVD
DVD
DTV/CBL
DVR
VCR
I/O Assignment
Audio Select
Decoder Mode
Volume Trim
Rename
V-AUX or DOCK I/O Assignment*
Audio Select*
Decoder Mode*
Volume Trim
Rename
PC/MCX, NET RADIO or
USB
Volume Trim
Notes
Stereo/Surround
Input Select
Manual Setup
Auto Setup
System Memory
Sound
Video
Basic
NET/USB
Option
Stereo/Surround
Input Select
Manual Setup
Auto Setup
MD/TAPE
BD/HD DVD
DVD
DTV/CBL
DVR