AV Receiver Owner's Manual

21 En
Connections
PREPARATION
English
This unit has four HDMI input jacks and one HDMI
output jack for digital audio and video signal input/output.
Connect the HDMI IN1, HDMI IN2, HDMI IN3, or
HDMI IN4 jack of this unit to the HDMI output jack of
other HDMI components (such as a DVD player). Connect
the HDMI OUT jack of this unit to the HDMI input jack
of other HDMI components (such as a TV and a
projector).
The video or audio signals input at the HDMI IN jacks of
the selected input source are output at the HDMI OUT
jack of this unit.
y
• You can check the potential problem about the HDMI
connection (see page 98).
• See page 145 for the information on the input signal capability
of this unit for the HDMI connection.
■ HDMI jack and cable plug
y
• We recommend that you use a commercially available HDMI
cable shorter than 5 meters (16 feet) with the HDMI logo
printed on it.
• Use a conversion cable (HDMI jack
↔ DVI-D jack) to connect
this unit to other DVI components.
• Do not disconnect or connect the cable or turn off the power of
the HDMI components connected to the HDMI OUT jack of
this unit while data is being transferred. Doing so may disrupt
playback or cause noise.
• The HDMI OUT jack outputs the audio signals input at the
HDMI input jacks only even if “Support Audio” is set to
“Other” (see page 98).
• If you turn off the power of the video monitor connected to the
HDMI OUT jack via a DVI connection, this unit may fail to
establish the connection to the component.
• The analog video signals input at the composite video, S-video
and component video jacks can be digitally up-converted to be
output at the HDMI OUT jack. Set “Conversion” to “On” in
“Manual Setup” (see page 89) to activate this feature.
■ Default input assignment of HDMI input
jacks
Information on HDMI™
Notes
HDMI
HDMI cable plug
HDMI input jack Assigned input source
IN1 BD/HD DVD
IN2 DVD
IN3 DTV/CBL
IN4 DVR