Owner's Manual

En 55
SETUP
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
1
Set this unit to the standby mode.
2
Press A while pressing and holding STRAIGHT on
the front panel.
Release the keys when “ADVANCED SETUP” is displayed on
the front panel display.
After approximately 3 seconds, the top menu items are displayed.
3
Use PROGRAM to select the item to be set from the
following items.
In the Advanced Setup menu, you can set the following settings.
4
Press STRAIGHT a few times to select the value you
wish to change.
5
Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on. If
initialization is selected, it will be performed when the unit is
powered on again.
Setting the impedance of speakers
Changes the unit settings depending on the impedance of the
speakers connected. J1
Extended functionality that can be configured as needed (Advanced Setup menu)
PHONES
SILENT
CINEMA
TONE CONTROL
STRAIGHT
TV
BD
DVD
CD RADIO
INPUT
PROGRAM
SCENE
INFO
MEMORY PRESET FM AM
STRAIGHT
A
PROGRAM l / h
SPIMP.-8MIN
SP IMP. Sets the impedance of speakers.
REMOTE ID Changes the remote control ID of a receiver.
INIT Initializes various settings for this unit.
6 MIN Select the impedance when 6Ω speakers are
connected.
8 MIN (Default) Select the impedance when speakers above 8Ω are
connected.
SPIMP.-8MIN
J
1 : For detailed procedures of speaker impedance settings, refer to “Changing
speaker impedance” (☞
p. 10).