Owner's Manual

En 158
Switching the DTS format notification setting (DTS MODE)
Switches the DTS format notification setting.
This setting informs the video device (such as BD/DVD player) about the DTS formats that the
unit supports.
Settings
Backing up/recovering the settings (BACKUP/RESTORE)
Backups and restores all the unit's setting to a USB memory device. Prepare a USB memory
device using FAT16 or FAT32 format in advance.
Choices
■ Backup/rstore procedure
1
Connect the USB memory device to the USB jack on the front panel.
2
To start the process, press STRAIGHT to select “BACKUP” or “RESTORE” and then press INFO
on the front panel.
3
Press INFO again after the confirmation message appears on the front display.
X
To cancel the operation, press STRAIGHT.
4
When “Please Power Off!” appears on the front display, press z (power) to set the unit to
standby mode and turn it on again.
If “Failed” appears on the front display, check the following and start the process again.
In case of “BACKUP”:
• You cannot overwrite save. When you save the settings repeatedly, please move the file in
different folder.
• The file is stored by the name of “MC_backup_(model name).dat” in the root of the USB
memory device.
In case of “RESTORE”:
• Check that the file is stored in the route of the USB memory device.
Y
•“RESTORE” is effective after backuping all the settings.
• Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be
restored correctly.
• The user information (such as account, password) is not saved.
Restoring the default settings (INITIALIZE)
Restores the default settings for the unit.
Choices
MODE 1
This mode conforms to the DTS:X standard.
Use this setting under normal circumstances.
MODE 2
Use this setting if the video device (such as BD/DVD player) fails to properly output
a DTS signal even when it is playing back DTS-HD or DTS:X content.
BACKUP Creates backup of the settings of the unit in the USB memory device.
RESTORE
Restores the settings of the unit from the backup (available only when backup has
been created).
MODE 1
DTS MODE
BACKUP
BACKUP/RESTORE
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
CANCEL
INITIALIZE