Owner's Manual

English

Speaker Settings

This unit has seven SPEAKER SET items in the SET MENU that you must set according to the number of speakers in your configuration

and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings. If

the initial settings are not appropriate for your speaker configuration, change the settings in the SET MENU.

Summary of SPEAKER SET items 1A through 1G

Item

1A. CENTER SP

1B. MAIN SP

1C. REAR L/R SP

1D. REAR CT SP

1E. LFE/BASS OUT

1F. FRNT EFCT SP

1G. MAIN LEVEL

Description

Selects the Center channel output mode according to the size of the Center speaker.

The possible settings are LRG (large), SML (small), and NONE.

Selects the Main channel output mode according to the size of the Main speakers.

The possible settings are LARGE and SMALL.

Selects the Rear channel output mode according to the size of the Rear speakers.

The possible settings are LRG (large), SML (small), and NONE.

Selects the Rear Center channel output according to the size of the Rear Center speaker.

The possible settings are LRG (large), SML (small), and NONE.

Selects a speaker for the LFE/Bass signal output.

The possible settings are SWFR (subwoofer), MAIN, and BOTH.

Selects the Front Effect signal output mode for the Front Effect signals.

The possible settings are YES and NONE.

Selects the output level for the Main channel signal.

The possible settings are Normal and –10 dB.

Initial Setting

LRG

LARGE

LRG

BOTH

YES

Normal

Note:

• When you adjust the balance of the output level from the Right and Left Main speakers, use “L/R BALANCE” on the SET MENU.