Operation Manual

90 En
GRAPHIC USER INTERFACE (GUI) SCREEN
4 Press n to select “EDIT” and press ENTER to
access the edit window.
The parameter selected in “PARAM” is highlighted.
Press l / h to adjust the parameter.
Press k / n to adjust the “Gain”.
Press ENTER to exit the edit window.
y
When you select “Band” in step 3, you can use this menu
as a graphic equalizer.
The “Band #1” and “Band #2” can adjust the frequencies
below of 198.4 Hz.
When you select “Subwoofer” in step 1 and “Band” in
step 3, you can adjust “Band #1” and “Band #2” only.
For more information on the parametric equalizer, see
page 89.
5 Repeat steps 3 and 4 until you are satisfied
with the results.
y
If you want to reset all “Parametric EQ” parameter settings
for the selected speaker, select “RESET” and press ENTER.
6 Select “EXIT” and press ENTER to exit the
settings window.
Tone Control (Tone control)
Use this feature to adjust the balance of bass and treble
output to your speakers or headphones.
Choices: Control, Bass, Treble, Audio Bypass
Tone Control is not effective when:
PURE DIRECT (see page 52) is selected.
MULTI CH INPUT is selected as the input source.
Control (Tone control)
Choices: Speakers, Headphones
Select “Speakers” to adjust the bass/treble balance of
your speakers.
Select “Headphones” to adjust the bass/treble balance
of your headphones.
y
“Speaker” and “Headphone” adjustments are stored
independently. The adjustments for “Speaker” affects the front
left/right, center, presence left/right speaker channels and
Subwoofer channel.
Bass (Bass control)
Use this feature to adjust low-frequencies output to your
speakers or headphones.
Choices: 125 Hz, 350 Hz, 500 Hz
Control range: 6.0 dB to + 6.0 dB
Initial setting: 0.0 dB
Treble (Treble control)
Use this feature to adjust high-frequencies output to your
speakers or headphones.
Choices: 2.5 kHz, 3.5 kHz, 8.0 kHz
Control range: – 6.0 dB to + 6.0 dB
Initial setting: 0.0 dB
Note
Front L
Q
Freq.
Gain
Band
1.000
125.0Hz
0.0dB
#1
Front R
Center
Test Tone
Headphones
Speakers
Bass
Treble
Control
Bass
Treble
Control
Speaker
Freq : 350Hz
Gain : 0.0dB
+6
+0
-6
Audio Bypass
Auto Bypass
Bass
Treble
Control
Speaker
Freq : 3.5kHz
Gain : 0.0dB
+6
+0
-6