Manual

3
4
Start playback on the selected source
component or select a broadcast station.
• Refer to the operating instructions t_r the source
component.
• See page 56 for details about tuning instructions.
• See page 67 for details about XM Satellite Radio
tuning instructions.
Rotate VOLUME on the front panel (or press
VOLUME +/- on the remote control) to adjust
the volume to the desired output level.
or
Front panel Remote control
_.,&
See page 53 to a@lst I1]elevel of each speaker.
Rotate the PROGRAM selector on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display and in the short message
display. See page 47 for details about sound field
programs.
PROGRAM @
Front panel Remote control
Currently selected sound field program category
=.==...-. = = .==r
I=ILJ_.,J.Li:2
.. .... =.....
Z=C. ii, "'l" ii.
Currently selected sound field program
Sound field programs and the Compressed Music Enhancer
mode canuot be selected when the compoueut conuected to
the MULTI CH INPUT.jacks is selected as the input source
(see page 43) and Audio input jack select is set to
"ANALOG" (see page 42).
• Choose a sound field program based on your listening
preli:rence, not merely on the nanm of the program.
• When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
• Guide to contents
See
When you want to...
page
Enjoy pure hiq] stereo sound 52
Adjust the tonal quality of the front speakers 52
Enjoy the compressed music sources in enhanced 54
sound
Edit parameters of sound field programs 88
El\joy the sources which have wide dynamic range at 55
night
Use headphones 43
Enjoy multi-channel sources in 2-channel stereo 53
Select a decoder to play back sources with 84
Set this unit to the standby mode automatically 45
41 En