Manual

[*Y:I IJlil'*]Avl
If you are to use 6 ohm speakers, set "SPEAKER
IMP." to "6f_MIN" as follows BEFORE using this
unit. 4 ohm speakers can be also used as the
front speakers.
(U.S.A. model)
Press STRAIGHT on the front panel
repeatedly to select "6_QMIN".
The l\_llow,ing display appears in tile front panel
display.
STR_._r
;:::,-"L::.i.,.iF,.L::,h; i. HL",,
/" i"% -,.' •
• :,: : :'a
2
2,5 3 2,4
Make sure this unit is turned off.
See page 34 for details about turning on or off this
unit.
Press and hold STRAIGHT on the front panel
and then press MASTER ON/OFF inward to
the ON position to turn on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
While holding
down
_TPAIGHT_ _ MAST_ER
5 Press MASTER ON/OFF on the front panel to
release it outward to the OFF position to save
the new setting and turn off this unit.
The setting you made is reflected next time you turn on this
unit.
3 Rotate the PROGRAM selector on the front
panel to select "SPEAKER IMP.".
The following disphty appears in the front panel
display.
PROGRAM
=""r": r" =%i,." r" r": T I.A r":
.Dr" i;z i...ir.., ff.r':. .L i'ir" ,_
33 En