Manual

FRONT terminals
Connect front left and right speakers to these terminals.
CENTER terminals
Connect a center speaker to these terminals.
SURROUND terminals
Connect surround left and right speakers to these
terminals.
SURROUND BACK terminals
Connect surround back left and right speakers to these
terminals.
,,',h,/i,/=;,ll(Oh,l_
• Connecting the speaker cable
Remove approximately 10 mm (0.4 in) of
insulation from the end of each speaker
cable and then twist the exposed wires of the
cable together to prevent short circuits.
When youuse a surround back speaker,connect thespeaker to the
left SURROUND BACK terminal (SINGLE).
PRESENCE terminals
Connect presence left and right speakers to these
terminals.
SUBWOOFER jack
Connect a snb'a,oofer with a built-in amplifier (such its the
YAMAHA Active Servo Processing Subwoofer System)
to this jack.
2 Loosen the knob using the supplied speaker
terminal wrench.
Speaker terminal wrench
Red: positive (+)
Black: negative (-)
3 Insert one bare wire into the hole on the side
of each terminal.
J
4 Tighten the knob to secure the wire using the
supplied speaker terminal wrench.
17 En