Manual

Bass Out (Bass out)
Use this feature to select tile speakers that output tile LFE
(low-frequency effect) and the low-frequency signals.
Choices: Both, SWFR, Front
SWFR Phase (Subwoofer Phase)
Use this feature to switch tile phase of your sub'a, oofer it"
bass sounds are lacking or unclear.
Choices: Normal, Reverse
• Select "Both" (both) if you connected a subwoofer.
The low-frequency signals of any source are output
from the subwoofer. The LFE signals as well as the
low-frequency signals of other speakers set to "Small"
are directed to the subwoofer. The low-frequency
signals of the front left and right channels are directed
to the front left and right speakers and the subwoofer
regardless of the "Front" setting (see page 107).
• Select "SWFR" (subwoofer) if you connected a
subwoofer. The LFE signals as well as the low-
frequency signals of other speakers set to "Small" are
directed to the subwoofer.
• Select "Front" (front) if you did not connect a
subwoofer. The LFE signals, the low-frequency signals
of the front left and right channels, and the low-
frequency signals of other speakers set to "Snmll" are
all directed to the front left and right speakers
regardless of the "Front" setting (see page 107).
Bass Cross Over (Bass cross over)
Use this feature to select the crossover frequency of all the
speakers set to "Small" or to "None" in "Speaker Set" (see
pages 105 and 106). All frequencies below the selected
frequency will be sent to the subwoofer or to the speakers
set to "Large" in "Speaker Set" (see pages 105 and 106).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, l l0Hz,
120Hz, 160Hz, 200Hz
• Select "Normal" if you do not want to reverse the
phase of your subwoofer.
• Select "Reverse" to reverse the phase of your
subwoofer.
PR/SB Priority
(Presence/surround back speaker priority)
Use this feature to prioritize either the presence or the
surround back speakers when playing sources that contain
surround back channel signals using the CINEMA DSP
sound field programs.
Choices: Presence, Surround Back
• Select "Presence" to use the presence speakers even
when surround back channel signals are input. The
signals for the surround back channel will be output
from the surround speakers.
• Select "Surround Back" to use the surround back
speakers when surround back channel signals are
detected in a CINEMA DSP program. The presence
channel signals are output from the front speakers.
107 En