Manual
• HDMI Aspect (HDMI aspect ratio)
Use to select the HDMI aspect ratio.
Choices: Through, 16:9 Normal
• Position (Position)
Use to adjust the vertical and horizontal position of the
GUI display.
Control range: -5 (downward/left) to +5 (upward/right)
Select "Through" if you do not make any adjustments
to the HDMI aspect ratio.
Select "16:9 Normal" if you want to display video
images with 4:3 of HDMI aspect ratio on your video
monitor with 16:9 of HDMI aspect ratio. Black stripes
appear on the right and left sides as a result.
• Short Message (Short message)
Use to select whether to display short messages regarding
system operations on your video monitor.
Choices: Off, On
• Press/_ to raise the position of the GUI display.
• Press V to lower the position of the GUI display.
• Press C:>to shift the position of the GUI display to the
right.
• Press <1 to shift the position of the GUI display to the left.
• Wall Paper (Wall paper)
Use to select the background of the GUI display.
Choices: None, Yes, Gray
Select "OFF' if you do not want to display any short
messages.
Select "On" if you want to display short messages.
• The short message display may not display properly depending
on the type of input signal and video monitor used.
• If Conversion is set to Off. the short message display is not
displayed even if On is selected.
• Select "None" not to display any background in the
GUI display.
• Select "Yes" to display a background image in the GUI
display.
• Select "Gray" to display a gray background in the GUI
display.
If Video Cony. is set to "Ofl". no background is displayed even if
"Yes" is selected.
89