Manual

l_Y_ T,,.,"?Eo,!"./l'_| _,_Y_,TN,"
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the
component.
Adjust the volume to the desired output
level.
If desired, use BASS, TREBLE and BASS
EXTENSION etc. These controls are only effective
for sound from the main speakers.
VOLUME
lO! °r _",
"'-,/7
BASS TREBLE
Remote control
BASS PROCESSOR
EXTENSION DIRECT
Front panel
• If the component connected to the VCR 1 OUT, VCR 2/DVR
OUT, CD-R OUT and MD/TAPE OUT jacks is turned off, the
reproduced sound may be distorted or the volume may be
lowered for the characteristics of AV receivers. In this case,
turn on the component.
[] Select a DSP program if desired.
Use PROGRAM <1 / [:> (DSP program buttons on
the remote control) to select a DSP program. See
pages 31 to 35 for details about the DSP program.
<] PROG RAM L>-
Front panel
or
Remote control
• BGV (background video) function
The BGV function allows you to combine a video image
from a video source with a sound from an audio source.
For example, you can enjoy listening to classical music
while having beautiful scenery from the video source on
the video monitor.
Select a source from the video group and then select a
source from the audio group with the input selector
buttons on the remote control. This selection for BGV
cannot be made with INPUT <1 ! I:> on the front panel.
Z5
• To mute the sound
Press MUTE on the
remote control.
To resume the audio output,
press MUTE again.
_%-
• You can also cancel mute to press any operation buttons such as
VOLUME +/-.
• During muting, the "MUTE" indicator flashes on the front
panel display and "MUTE ON" appears on the front panel
display for a few seconds.
• When you have finished using
this unit
Press STANDBY/ON (STANDBY on the
remote control) to set this unit in the
standby mode.
STANDB_
or
Front panel Remote control
26