manual

SETUP
Controlling the remote control to operate various functions
En 113
Customizing the remote control
Use the setup mode of the remote control to customize
the remote control.
1
Open the cover of the remote control and
press
ASETUP.
“SETUP” appears in the display window on the remote
control.
2
Press iCursor B / C repeatedly to select
the desired setup mode.
Pressing mSOURCE/RECEIVER repeatedly can
also change the setup mode.
3
After the configurations, press ASETUP
again to exit from the setup menu.
Setting remote control codes
■ Default remote control code
settings
The following remote control codes are assigned to input
sources at factory default settings. For a complete list of
available remote control codes, refer to “Remote Control
Code Search” in the CD-ROM.
SOURCE
RECEIVER
ENTER
SETUP
AV
A
UDI
O
4
3
1
2
7
5
6
V
-AUX
4
3
1
2
US
B
MULTI
NET
P
H
O
N
O
TUNER
D
OC
K
TU
N.
/CH
[
B
]
[
A
]
i
A
m
Setup mode Descriptions Page
SETUP Top setup mode menu. —
LEARN Learning mode. Use this feature to
program codes from other remote
controls.
115
PRESET Preset mode. Use this feature to
change the remote control code of
each control area.
114
RENAME Renaming mode. Use this feature
to change the name of each control
area.
117
MACRO Macro programming mode. Use
this feature to set the macro
program.
118
CLEAR Clearing mode. Use this feature to
clear the configurations of this
unit.
119
ERASE Erase mode. Use this feature to
erase the learned functions of each
button.
120
EX-IR Extended IR code mode. This
feature is for the authorized custom
installers only.
—
NOTE
If no operation is performed for 30 seconds, this unit
automatically exits from the setup menu.
Control
area
Category Manufacturer
Remote
control
code
AV1 Blu-ray player/
recorder
Yamaha 2064
AV2 ———
AV3 ———
AV4 ———
Setup mode Descriptions Page
AV5 ———
AV6 ———
AV7 ———
V-AUX ———
AUDIO1 ———
AUDIO2 CD player Yamaha 5095
AUDIO3 ———
AUDIO4 ———
PHONO ———
MULTI ———
USB ———
NET ———
DOCK ———
TUNER ———
[A]/[B] J1 ———
NOTES
• You may not be able to operate your Yamaha
component even if a Yamaha remote control code is
preset as listed above.
In this case, try setting another Yamaha remote control
code.
• If this unit’s remote control is unable to control other
components with specification of the corresponding
remote control code, it can be programmed using other
remote controls (☞
p. 115).
Control
area
Category Manufacturer
Remote
control
code
J
1 : Use [A]/[B] for external component operations only. Set these
keys to remote control codes if you want to perform external
component operations without linking to input source selection of
this unit. For example, it may be convenient to assign remote
control codes for devices such as TVs.