Owner`s manual

43 En

SIRIUS Satellite Radio™ tuning (U.S.A. model only)

English

INTRODUCTION

ADDITIONAL

INFORMATION APPENDIX

PREPARATION

BASIC

OPERATION

ADVANCED

OPERATION

Use this feature to display the SIRIUS Satellite Radio

information on the front panel display or on the GUI

screen.

Note

• If a status message or an error message appears on the front panel display

or GUI screen, see “SIRIUS Satellite Radio” (page 81).

■ Front panel display

Press EINFO (or fINFO) repeatedly to toggle

the following SIRIUS Satellite Radio information

display modes.

Back to “Channel”

Display example (Antenna)

• You can configure the scroll setting of the front panel display with “Front

Panel Display Scroll” in the Setup menu (page 63).

• If the SIRIUS Satellite Radio information contains a character that

cannot be recognized by this unit, the character will be displayed with a

space.

• When the antenna of the SiriusConnect tuner cannot receive the signals,

“ACQUIRING” appears on the front panel display.

• When an information is unavailable, “––––” appears.

■ GUI screen

Press uDISPLAY on the remote control to turn

on or off the information display.

The following information is displayed on the GUI screen.

a Channel number

b Search mode (page 40)

c Channel name, channel category, artist name,

song title, composer name

d Antenna reception level

• To hold or release the displayed information, press jENTER. While it

is held, the “HOLD” icon appears on the GUI screen..

Displaying the SIRIUS Satellite

Radio™ information

Channel

Channel number, channel name