AV Receiver Owner's Manual

49 En
FM/AM tuning
BASIC
OPERATION
English
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (A).
• If you select a preset number being used ("*" appears next
to the preset number), the current preset station will be
overwritten.
4 Press FENTER (or 8ENTER).
The preset station is set and the PRESET indicator
disappears.
The reception mode (stereo or monaural) is stored along with
the station frequency.
■ Recalling a preset station
1 If the PRESET indicator in the front panel
turns off, press ISEARCH MODE (or
HSRCH MODE) to turn it on.
You cannot enter the preset tuning mode if no preset station is
set in advance.
2 Press GPRESET/TUNING/CH l / h (or
8PRESET/CH k / n) repeatedly to select
the desired preset station group and number
(A1 to E8).
y
• Empty preset numbers are skipped.
• You can also select a preset station group (A to E) by pressing
8CAT./A-E l / h and number (1 to 8) by pressing the
numeric buttons (A),
• (U.S.A. model only)
When you recall one of the sub-audio program (HD2 to HD8)
of an FM HD Radio station, it takes a few seconds for this unit
to recall the desired program. While this unit recalls the sub-
audio program, this unit outputs the sound of the analog service
of the station.
• (U.S.A. model only)
If the selected sub-audio program is currently not available, this
unit is tuned into the main audio program, and if the main audio
program is also not available, this unit is tuned into the analog
service.
■ Clearing preset stations
You can clear the assignments of preset stations.
1 Select the preset station you want to clear.
For details, see “Recalling a preset station” (page 49).
2 Press and hold ISEARCH MODE (or
HSRCH MODE) until “CLEAR?” appears in
the front panel display.
3 Press FENTER (or 8ENTER) to clear the
preset station.
y
To cancel the operation, press ISEARCH MODE (or
HSRCH MODE) again.
Note
Note
Note
PRESET
A FM 88.9MHz
Lights up
PRESET
A5 FM 89.5MHz
Preset station group and number
A1 CLEAR?[ENT]
FM 88.9MHz