Operation Manual

En 28
1
After connecting external devices (TV, playback devices, etc.) and
power cable of this unit, turn on this unit and TV.
2
Switch the TV input to display the video from this unit.
3
Press ON SCREEN.
4
Use the cursor keys to select “Input” and press ENTER.
5
Use the cursor keys ( / ) to select “AV2” (video input jack to be used)
and press the cursor key ( ).
6
Use the cursor keys to select “Audio In” and press ENTER.
7
Use the cursor keys to select “AV5” (audio input jack to be used).
8
Press ON SCREEN.
Now the necessary setting is complete.
If you select “AV2” as the input source by pressing AV2, the video/audio played
back on the video device will be output from this unit.
Connecting audio devices (CD players, etc.)
Connect audio devices such as CD players and MD players to this unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
If you select the input source by pressing AV1~6 or AUDIO1~2, the audio played back
on the audio device will be output from this unit.
Audio output jacks on audio device Audio input jacks on this unit
Digital optical
AV1 (OPTICAL)
AV4 (OPTICAL)
Digital coaxial AV2~3 (COAXIAL)
Analog stereo
AV5~6 (AUDIO)
AUDIO1~2
COMPONENT
VIDEO
VI
D
DOCK NETWORK
FMAM
75Ω
ANTENNA
P
R
PB
Y
P
R
PB
Y
AUDIO 2AUDIO 1 AV 6AV 5AV 4AV 3
(
CD
)(
TV
)
VIDEO
AV 2AV 1
COAXIAL OPTICALCOAXIALOPTICAL
AV
OUT
COMPONENT
VIDEO
R
L
HDMI OUT
ARC
(
MONITOR O
U
SIRIUS
R
L
COAXIAL
OPTICAL
R
L
COAXIAL
OPTICAL
OO
CC
L
R
L
R
Audio output
(any of digital optical, digital coaxial,
analog stereo)
AV1~6 jacks
AUDIO1~2 jacks
This unit (rear)
Audio device
1 2 3 4
Playback device connections
5 6 7 8 9