Owner’s Manual

Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV. You
can also enjoy playback of TV audio on the unit.
To maximize the performance of the unit, we recommend connecting a TV with an
HDMI cable.
n
HDMI connection
Connect the TV to the unit with an HDMI cable and a digital optical cable.
OPTICAL
(TV)
COAXIAL
COAXIAL
VIDEO
AM
FM
75 Ω
ANTENNA
(RADIO)
MONITOR
OUT
1
2
SUBWOOFER
PR
E OUT
HDMI
(
HDCP2.2)
1
(BD/DVD)
2
3
4
HDMI OUT
HDCP2.2
ARC
N
ETWORK
(NET)
FRONT
CENTER
SURROUND
SINGLE
LESS
AV 4
AV 3
AUDI0 2
AUDIO 1
AV 2
AV 1
SPEAKERS
SURROUND BACK/PRESENCE
BI-AMP/ZONE B
HDMI
HDMI
HDMI
AUDIO 1
(
TV
)
OPTICAL
OPTICAL
O O
HDMI
HDMI
HDMI
AUDIO 1
(
TV
)
OPTICAL
OPTICAL
O O
The unit (rear)
AUDIO 1 (OPTICAL) jack
HDMI OUT jack HDMI input
Audio output
(digital optical)
TV
Note
▪ You do not make a digital optical cable connection between the TV and the unit in the following cases:
– If your TV supports Audio Return Channel (ARC)
– If you will receive TV broadcasts only from the set-top box
▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
To use HDMI Control and ARC, you need to configure the HDMI settings on the unit.
For details on the settings, see “Information on HDMI” (p.
122).
About Audio Return Channel (ARC)
▪ ARC allows audio signals to travel both ways. If you connect a TV that supports ARC to the unit with a
single HDMI cable, you can output video/audio to the TV or input TV audio to the unit.
▪ When using ARC, connect a TV with an HDMI cable that supports ARC.
n
Composite video connection
When connecting any video device with a video pin cable, connect the TV to the
MONITOR OUT (VIDEO) jack.
Note
▪
If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI.
▪ If you will receive TV broadcasts only from the set-top box, you do not need to make an audio cable
connection between the TV and the unit.
VIDEO (composite video) connection
Connect the TV to the unit with a video pin cable and a digital optical cable.
OPTICAL
(TV)
COAXIAL
COAXIAL
VIDEO
AM
FM
75 Ω
ANTENNA
(RADIO)
MONITOR
OUT
1
2
SUBWOOFER
PR
E OUT
HDMI
(
HDCP2.2)
1
(BD/DVD)
2
3
4
HDMI OUT
HDCP2.2
ARC
N
ETWORK
(NET)
FRONT
CENTER
SURROUND
SINGLE
LESS
AV 4
AV 3
AUDI0 2
AUDIO 1
AV 2
AV 1
SPEAKERS
SURROUND BACK/PRESENCE
BI-AMP/ZONE B
VIDEO
AUDIO 1
(
TV
)
OPTICAL
OPTICAL
O O
MONITOR
OUT
V
V
The unit (rear)
AUDIO 1 (OPTICAL) jack
MONITOR OUT (VIDEO) jack
Video input
(composite video)
Audio output
(digital optical)
TV
En
24