Owner's Manual
PLAYBACK
Configuring settings specific to an individual input source (Option menu)
En 64
■
Adjusting volume between input sources
Volume Trim
Reduces any change in volume when switching between input
sources by correcting volume differences in each input source. You
can adjust this parameter for each input source.
■
Selecting a video adjustment preset
Video Adjustment
Selects the desired “Adjustment” (☞
p. 103) preset to be applied to
the selected input source.
■
Selecting audio input jacks
Audio Select
Select the audio input jack through which source signal is input
when an input source is connected to more than one jack.
■
Shuffle playback
Shuffle
Plays back songs or albums in random order. When the shuffle
function is enabled, “ ” appears on the TV screen. J1
■
Repeat playback
Repeat
Plays songs or albums repeatedly. When the repeat function is
enabled, “ (Single / One[iPod])” or “ (All)” appears on
the TV screen. J1
■
Connect / Disconnect Bluetooth
component
Connect
Disconnect
Switches communication with a Bluetooth component on and off
(☞
p. 80).
■
Pairing Bluetooth component
Pairing
Performs pairing of this unit and a Bluetooth component (☞
p. 80).
Adjustable range -6.0 dB to +6.0 dB
Default setting 0.0 dB
Adjustment
increments
0.5 dB steps
Auto (Default) Automatically selects input signal in the following
order:
(1) HDMI
(2) Digital signal
(3) Analog signal
HDMI Selects only HDMI signal. When no HDMI signal is
input, no sound is output.
Coax/Opt Selects only coaxial or optical signal. When no signal
is input, no sound is output.
Analog Selects only analog signal. If no analog signal is
input, no sound is output.
Off The shuffle function is turned off.
On J2 The shuffle function is tuned on.
Songs J3 Plays songs back in random order.
Albums J3 Plays albums back in random order.
Off The repeat function is turned off.
Single / One[iPod] Plays a song back repeatedly.
All When all songs have completed playback, returns to
the start and repeats playback.
J
1 : Not available for Yamaha Wireless System for iPod.
J
2 : This item is displayed only when PC or USB is selected as input source.
J
3 : This item is displayed only when DOCK (iPod) is selected as input source.