Product manual

JOBS #21 - #25: VERIFY DATA
FUNCTION
Verifies whether data has been saved correctly
to a cartridge or cassette.
Refer to the CASSETTE/CARTRIDGE Menu on the RX7
front panel and the TABLE OF CASSETTE/CARTRIDGE
JOBS above to determine the appropriate Job number for
the type of data to be verified.
The operations for verifying single Patterns saved to a car-
tridge or cassette (Job #13) are slightly different and therefore
explained separately below.
The Verify operations are exactly complementary to the Save
operations explained above.
GENERAL VERIFY OPERATION
1. Select the desired Job #21, #22, #24 or #25.
The display will ask you to confirm your choice of data
type.
2. Press +1/YES if you want to verify the displayed data.
The LCD will ask for confirmation:
3. Press +1/YES again to confirm.
The display will show
then
indicating that the data has been verified.
VERIFYING SINGLE PATTERNS SAVED
TO A CARTRIDGE
1.
Select Job #23 in Cartridge Mode.
The display will ask you to confirm:
2. Press +1/YES. The display will change to
44
3. You can now specify the Pattern number and cartridge
location you want to verify. (Use ACCENT 2 to switch
between them.)
4. Press +1/YES.
The LCD will ask you to confirm.
5. Press +1/YES again.
If the data has been saved properly, the display will show
* If data has not been saved correctly, an error message
will appear instead. Refer to the section ERROR MES-
SAGES.
VERIFYING SINGLE PATTERNS SAVED
TO A CASSETTE
1.Select Job #23 in Cassette Mode.
The display will ask you to input the PTN number.
2. Enter the Pattern number directly with the numeric keys,
then press +1/YES. The display will ask you to confirm:
3.Press +1/YES again. The display will show
After verification, the display will show the following
message if the data has been saved properly: