Owner`s manual
Table Of Contents
- INTRODUCTION
- PREPARATION
- BASIC OPERATION
- ADVANCED OPERATION
- SET MENU
- Adjusting the items on the SET MENU
- 1 SPEAKER SET (speaker mode settings)
- 2 LFE LEVEL
- 3 SP DLY TIME (speaker delay time)
- 4 D. RANGE (dynamic range)
- 5 L/R BALANCE (balance of the main left and right speakers)
- 6 HP TONE CTRL (headphone tone control)
- 7 I/O ASSIGN (input/output assignment)
- 8 INPUT MODE (initial input mode)
- 9 DISPLAY SET
- 10 MEM. GUARD (memory guard)
- REMOTE CONTROL FEATURES
- ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS
- ADJUSTING THE DELAY TIME
- ADJUSTING THE PARAMETER SETTINGS FOR PRO LOGIC II MUSIC
- SET MENU
- ADDITIONAL INFORMATION
- LIST OF MANUFACTURER'S CODES
![](/manual/yamaha/rx-530/owner-s-manual-english/images/img-49.png)
47
English
INTRODUCTION
PREPARATION
BASIC OPERA-
TION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
SET MENU
8 INPUT MODE (initial input
mode)
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn
on this unit (see page 25 for details about the input
mode).
Choices: AUTO, LAST
AUTO
Select this to allow this unit to automatically detect the
type of input signal and select the appropriate input mode.
LAST
Select this to set this unit to automatically select the last
input mode used for the respective source.
9 DISPLAY SET
■ DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
10 MEM. GUARD (memory guard)
Use this feature to prevent accidental changes to settings
on this unit.
Choices: ON, OFF
Select ON to protect the following features:
• All SET MENU items
• Center, rear speakers, and subwoofer levels
• DSP program parameters
Notes
• When this item is set to ON, you cannot use the test tone.
• When this item is set to ON, you cannot select any other SET
MENU items.
0108V530_42-47_EN(GB) 1/18/02, 6:45 PM47