Owner's Manual

FM/AM TUNING
You can tune into the desired station simply by selecting
the preset station number where it
is stored.
2,4
2 Press EDIT on the front panel.
El and the MEMORY indicator flash in the front
panel display.
You can exchange the assignment of two preset stations
with each other. The following procedure describes an
example where a preset station EI
is exchanged with
another preset station A5.
1 Repeat steps 1 and 2 in "Selecting preset
stations" to select a preset station E1.
AlB/CID/E
~
2
or
1
AlBlClD/£
Press AlBICIDIE on the front panel
repeatedly (or on the remote control) to
select a preset station group (A to E).
The selected preset station group
is shown in the front
panel display.
1
Front panel
Remote control
EDIT
~
MEMORY
Flashes
2 Press one of the preset station number
buttons on the front panel (or
PRESET
A I v on the remote control) to
select a preset station number
(1 to 8).
The preset station number appears in the front panel
display along with the reception band and the
frequency.
3 Repeat steps 1 and 2 in "Selecting preset
stations" to select another preset station A5.
A5 and the MEMORY indicator flash in the front
panel display.
MEMORY
Flashes
Front panel
or
4 Press EDIT on the front panel again.
EI-A5 appears in the front panel display, indicating
that the two preset station assignments have been
exchanged.
Remote control
24
FM/AM TUNING
You can tune into the desired station simply by selecting
the preset station number where it
is stored.
2,4
2 Press EDIT on the front panel.
El and the MEMORY indicator flash in the front
panel display.
You can exchange the assignment of two preset stations
with each other. The following procedure describes an
example where a preset station EI
is exchanged with
another preset station A5.
1 Repeat steps 1 and 2 in "Selecting preset
stations" to select a preset station E1.
AlB/CID/E
~
2
or
1
AlBlClD/£
Press AlBICIDIE on the front panel
repeatedly (or on the remote control) to
select a preset station group (A to E).
The selected preset station group
is shown in the front
panel display.
1
Front panel
Remote control
EDIT
~
MEMORY
Flashes
2 Press one of the preset station number
buttons on the front panel (or
PRESET
A I v on the remote control) to
select a preset station number
(1 to 8).
The preset station number appears in the front panel
display along with the reception band and the
frequency.
3 Repeat steps 1 and 2 in "Selecting preset
stations" to select another preset station A5.
A5 and the MEMORY indicator flash in the front
panel display.
MEMORY
Flashes
Front panel
or
4 Press EDIT on the front panel again.
EI-A5 appears in the front panel display, indicating
that the two preset station assignments have been
exchanged.
Remote control
24