Owner`s manual

7-8
ESU04360
Driving
WARNING
@
Be sure to read the “SAFETY INFORMATION” and
“Riding your snowmobile” sections carefully before
operating the snowmobile.
@
NOTE:
@
Make sure that the engine is warmed up enough before
riding.
@
1. To select the desired operating position, pull the shift
lever out, slide it to “FWD” or to “REV” until it stops,
and then release it.
1
Pull out
2
Slide to “FWD” (Forward)
3
Slide to “REV” (Reverse)
4
Release
WARNING
@
●
Make sure that the throttle lever is fully released
and the snowmobile is at a full stop before shift-
ing.
●
Be sure to slide the shift lever to “FWD” or “REV”
until it stops completely and only while the
engine is idling.
●
Make sure that the area behind the snowmobile is
clear before reversing. Watch behind.
●
Reduce speed and avoid sharp turning when
operating the snowmobile in reverse.
@
CAUTION
:
@
Do not shift from “FWD” to “REV” or from “REV” to
“FWD” while the snowmobile is moving. Otherwise,
the drive system could be damaged.
@
NOTE:
@
The reverse buzzer beeps while the shift lever is in
reverse.
@
E_8et.book Page 8 Wednesday, June 8, 2005 9:30 AM