User Manual

ManualsBrandsYamaha ManualsAudio Interface UnitsYamaha Ro8-D

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL Section
Centralogic section
- Operations in the Centralogic section
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the input patching
- Changing the output patching
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name/icon
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- Using EQ
- Simultaneously setting EQ type
- Using dynamics
- Using the EQ/Dynamics libraries
Channel Job
- DCA group
- DCA Roll-out function
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Third-party equipment’s HA control function
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using parameter changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the CL console with Nuendo Live
AFC IMAGE Control
- AFC IMAGE settings
- NETWORK window (AFC IMAGE page)
- SELECTED CHANNEL VIEW screen
- AFC IMAGE CONTROL zoom up screen (1ch)
- AFC IMAGE CONTROL zoom up screen (CH 1-32, CH 33-64, CH 65-72)
- SCENE LIST screen: AFC IMAGE tab
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Main fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
Warning/Error Messages
Index
Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart

Input channels

V5.8 Reference Manual

TO STEREO/MONO window (8ch)

Here you can control the on/off and pan/balance settings of the signal sent from input

channels to the STEREO (L/R) bus and MONO (C) bus, in groups of eight channels.

1 Channel select button

Selects the channel. You can select multiple channels simultaneously.

2 Mode LEDs

The LED of the currently-selected mode will light.

3 MODE select button

For a MONO channel, the mode can be switched between ST/MONO and LCR. For a

STEREO channel, the mode can be switched between PAN and BALANCE.

4 ST/MONO buttons

These buttons are on/off switches for signals that are sent from each channel to the

STEREO bus/MONO bus when the MONO button is set to ST/MONO mode.

5 Σ clipping indicator

Lights to indicate a signal is clipping at some point in the channel.

6 TO ST PAN/TO ST BALANCE knob

For MONO channels, this acts as a PAN knob that adjusts the left/right panning of

signals sent to the STEREO bus. For STEREO channels, this acts as a PAN knob, and also

as a BALANCE knob that adjusts the volume of the left and right signals sent to the

STEREO bus. To adjust the value, press the knob to select it, and then operate the

corresponding multifunction knob.

7 Tabs

Enable you to switch between windows.

8 LCR button

If the MODE button is set to LCR mode, this button is displayed instead of

4. This

button is an overall on/off button for signals sent from a channel to the STEREO bus and

MONO bus. If this button is off, no signals will be sent from the corresponding input

channel to the STEREO bus or MONO bus.

9 CSR knob

Adjusts the relative level of signals sent from the channel to the STEREO (L/R) bus and

to the MONO (C) bus, in the range of 0 - 100%. To adjust the value, press the knob to

select it, and then operate the corresponding multifunction knob (page 42).

ST/MONO mode LCR mode