User Manual

ManualsBrandsYamaha ManualsAudio Interface UnitsYamaha Ro8-D

301

302

303

304

305

306

307

308

309

310

Table Of Contents

How to Use This Reference Manual
Contents
Function Tree
SELECTED CHANNEL section
- Operations in the SELECTED CHANNEL Section
Centralogic section
- Operations in the Centralogic section
Input and output patching
- CL console internal patching and Dante audio network patching
- Changing the input patching
- Changing the output patching
- Inserting an external device into a channel
- Directly outputting an INPUT channel
Input channels
- Signal flow for input channels
- Specifying the channel name/icon
- HA (head amp) settings
- Sending the signal from an input channel to the STEREO/MONO bus
- Added pan function (Monaural input channels only)
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Channel name display indication
- Correcting delay between channels (Input Delay)
- Surround output for input channels
- Channel library operations
OUTPUT channels
- Signal flow for output channels
- Specifying the channel name/icon
- Sending signals from MIX channels to the STEREO/ MONO bus
- Sending signals from MIX channels and STEREO/ MONO channels to MATRIX buses
- Correcting delay between channels (Output Delay)
- Channel library operations
EQ and Dynamics
- Using EQ
- Simultaneously setting EQ type
- Using dynamics
- Using the EQ/Dynamics libraries
Channel Job
- DCA group
- DCA Roll-out function
- Mute group
- Using the Recall Safe function
- Channel Link function
- Copying, moving, or initializing a channel
- About Mix Minus
Scene memory
- Storing and recalling scenes
- Editing scene memories
- Using the Global Paste function
- Using the Focus Recall function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
Monitor and Cue functions
- Using the Monitor function
- Using the Cue function
Talkback and Oscillator
- Using Talkback
- Using the Oscillator function
Meters
- Operations in the METER screen
- Using an MBCL meter bridge (optional) on the CL3 or CL1 console
Graphic EQ, Parametric EQ, Effects, and PREMIUM RACK
- About the virtual rack
- Virtual rack operations
- Graphic EQ operations
- About AUTOMIXER
- Editing the internal effects
- Effects and tempo synchronization
- Using the Premium Rack
- Using the graphic EQ, parametric EQ, effect, and Premium Rack libraries
I/O devices and external head amps
- Using an I/O device
- Remotely controlling an R series unit
- Third-party equipment’s HA control function
- Remotely controlling an amp
- Remotely controlling WIRELESS unit
- Using an external head amp
MIDI
- MIDI functionality on the CL series console
- Basic MIDI settings
- Using program changes to recall scenes and library items
- Using control changes to control parameters
- Using parameter changes to control parameters
Recorder
- About the USB memory recorder
- Assigning channels to the input/output of the recorder
- Recording audio to a USB flash drive
- Playing back audio files from a USB flash drive
- Editing the title list
- Recording or playing back using a computer DAW
- Using the CL console with Nuendo Live
AFC IMAGE Control
- AFC IMAGE settings
- NETWORK window (AFC IMAGE page)
- SELECTED CHANNEL VIEW screen
- AFC IMAGE CONTROL zoom up screen (1ch)
- AFC IMAGE CONTROL zoom up screen (CH 1-32, CH 33-64, CH 65-72)
- SCENE LIST screen: AFC IMAGE tab
Setup
- About the SETUP screen
- User settings
- Preferences
- USER DEFINED keys
- Functions that can be assigned to USER DEFINED keys
- USER DEFINED knobs
- Functions that can be assigned to USER DEFINED knobs
- Assignable encoders
- Functions that can be assigned to the assignable encoders
- GAIN/PAN/ASSIGN knob (assignable encoder) functions
- Custom fader bank
- Main fader
- Custom fader bank functions
- Console Lock
- Saving and loading setup data to and from a USB flash drive
- Formatting a USB flash drive
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Dante audio network settings
- Dante Device Lock
- Support for Dante Domain Manager
- Using GPI (General Purpose Interface)
Help function
- Loading a Help/text file from a USB flash drive
- Viewing Help
- Using USER DEFINED keys to recall Help directly
Other functions
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Initializing the console settings and Dante audio network settings
- Update procedure for NAME SUB CPU firmware
- Update function to Dante firmware
Warning/Error Messages
Index
Data List
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Parameters That Can Be Assigned to Control Changes
- NRPN Parameter Assignments
- Mixing Parameter Operation Applicability
- MIDI Data Format
- Input/Output Characteristics
- Electrical Characteristics
- Mixer Basic Parameters
- Pin Assignment
- MIDI Implementation Chart

Data List

 REV+CHORUS

One input, two output reverb and chorus effects in parallel.

 REV→CHORUS

One input, two output reverb and chorus effects in series.

 REV+FLANGE

One input, two output reverb and flanger effects in parallel.

 REV→FLANGE

One input, two output reverb and flanger effects in series.

Parameter Range Description

REV TIME 0.3-99.0 s Reverb time

INI. DLY 0.0-500.0 ms Initial delay before reverb begins

HI. RATIO 0.1-1.0 High-frequency reverb time ratio

DIFF. 0-10 Diffusion (spread)

DENSITY 0-100% Reverb density

REV/CHO 0-100%

Reverb and chorus balance

(0% = all reverb, 100% = all chorus)

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

FREQ. 0.05-40.00 Hz Modulation speed

AM DEPTH 0-100% Amplitude modulation depth

PM DEPTH 0-100% Pitch modulation depth

MOD. DLY 0.0-500.0 ms Modulation delay time

WAVE Sine, Tri Modulation waveform

SYNC OFF/ON Tempo parameter sync on/off

NOTE

*1.

Used in conjunction with TEMPO to determine FREQ

Parameter Range Description

REV TIME 0.3-99.0 s Reverb time

INI. DLY 0.0-500.0 ms Initial delay before reverb begins

HI. RATIO 0.1-1.0 High-frequency reverb time ratio

DIFF. 0-10 Diffusion (spread)

DENSITY 0-100% Reverb density

REV.BAL 0-100%

Reverb and chorused reverb balance

(0% = all chorused reverb, 100% = all reverb)

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

FREQ. 0.05-40.00 Hz Modulation speed

AM DEPTH 0-100% Amplitude modulation depth

PM DEPTH 0-100% Pitch modulation depth

MOD. DLY 0.0-500.0 ms Modulation delay time

WAVE Sine, Tri Modulation waveform

SYNC OFF/ON Tempo parameter sync on/off

NOTE

*1.

Used in conjunction with TEMPO to determine FREQ

Parameter Range Description

REV TIME 0.3-99.0 s Reverb time

INI. DLY 0.0-500.0 ms Initial delay before reverb begins

HI. RATIO 0.1-1.0 High-frequency reverb time ratio

DIFF. 0-10 Diffusion (spread)

DENSITY 0-100% Reverb density

REV/FLG 0-100%

Reverb and flange balance

(0% = all reverb, 100% = all flange)

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

FREQ. 0.05-40.00 Hz Modulation speed

DEPTH 0-100% Modulation depth

MOD. DLY 0.0-500.0 ms Modulation delay time

FB. GAIN -99 to +99%

Feedback gain (plus values for normal-phase feedback, minus values for

reverse-phase feedback)

WAVE Sine, Tri Modulation waveform

SYNC OFF/ON Tempo parameter sync on/off

NOTE

*1.

Used in conjunction with TEMPO to determine FREQ

Parameter Range Description

REV TIME 0.3-99.0 s Reverb time

INI. DLY 0.0-500.0 ms Initial delay before reverb begins

HI. RATIO 0.1-1.0 High-frequency reverb time ratio

DIFF. 0-10 Diffusion (spread)

DENSITY 0-100% Reverb density

REV.BAL 0-100%

Reverb and flanged reverb balance

(0% = all flanged reverb, 100% = all reverb)

HPF THRU, 21.2 Hz-8.00 kHz High-pass filter cutoff frequency

LPF 50.0 Hz-16.0 kHz, THRU Low-pass filter cutoff frequency

FREQ. 0.05-40.00 Hz Modulation speed

DEPTH 0-100% Modulation depth

MOD. DLY 0.0-500.0 ms Modulation delay time

FB. GAIN -99 to +99%

Feedback gain (plus values for normal-phase feedback, minus values for

reverse-phase feedback)

WAVE Sine, Tri Modulation waveform

SYNC OFF/ON Tempo parameter sync on/off

NOTE

*1.

Used in conjunction with TEMPO to determine FREQ