User Guide

62 RM1x SEQUENCE REMIXER

PATTERN MODE

6. Arpeggio

This submode can be used to create simple automatic arpeggios based on notes played on the RM1x keyboard.

❏ Arpeggio Setting

Track number

Transpose

OFF, UP, DOWN, ALTER1,

ALTER2, RANDOM

Parameter Values Function

Type Specifies the arpeggio type.

Normally the arpeggio will play based on the order in which the

keys are pressed. But when the SORT parameter (below) is “ON,”

the arpeggio will play according to the selected TYPE regardless of

the order in which the keys are pressed.

“UP” produces an ascending arpeggio. “DOWN” produces a descend-

ing arpeggio. “ALTER1” and “ALTER2” produce different types of

alternating arpeggio. And “RANDOM” produces a random arpeg-

gio.

Sort ON, OFF Determines whether the arpeggio notes will or will not be “sorted”

according to the selected arpeggio TYPE (above).

Hold ON, OFF Determines whether the arpeggio will continue to play when the

notes are released or not.

When this parameter is “ON,” the arpeggio will continue to play when

the notes played on the RM1x keyboard or an external keyboard

are released. When “OFF” the arpeggio will stop as soon as the

notes are released.

Octave range 1 ... 4 Specifies the range of octaves the arpeggio will cover. When set to

“1,” the arpeggio will include only the notes played on the keyboard.

When set to “2,” “3,” or “4,” the arpeggio will be automatically ex-

tended to cover the specified number of octaves.

Track number 01 ... 16 Shows the current selected track number. Track number selection

can be accomplished via this parameter, or by the keyboard method

described on page 27.

Transpose -36 ... +36 Shows the current transpose value. Transposition can be accom-

plished via this parameter, or by the keyboard method described on

page 27.

* For information about how to change values, refer to the Basic Operation (page26).