User Guide

RM1x SEQUENCE REMIXER 127
SONG MODE
3. Number of measures to insert
■ Settings : 01 ... 99
Job 19 Delete Measure
1
4
This job removes a segment consisting of one or more meas-
ures. The segment is removed from all tracks.
The area that trails the deleted segment shifts forward (to-
ward the start of the song) to fill in the gap.
1. Range
The “M” values set the segment to be removed. The
first value gives the number of the first measure of the
segment; the second value gives the number of the final
measure.
■ Settings : 001 ... 999
❏ Track
Job 20 Copy Track
Essentially the same as in the PATTERN mode except that in
the SONG mode you will not need to specify a section and
the data types are different. Refer to page 95.
Job 21 Exchange Track
Essentially the same as in the PATTERN mode except that the
data types are different. Refer to page 96.
Job 22 Mix Track
1
4
2
a
b
b
This job mixes all data from a selected sequence track onto
another sequence track. The two tracks do not have to be in
the same song.
When the operation is completed, the source track remains
unchanged, while the destination track contains both its origi-
nal data and a copy of the source track’s data.
1. Source track (Track “a”)
The first TR value selects the source track. This is the
track containing the data to be mixed into the destina-
tion track. Following the mix, the source track’s con-
tent will remain unchanged.
■ Settings : 01 ... 16
2. Destination track (Track “b”)
The second TR value selects the destination track. The
original content of this track becomes mixed with the
content from Track “a.”
■ Settings : 01 ... 16
Job 23 Clear Track
Essentially the same as in the PATTERN mode except that in
the SONG mode you will not need to specify a section and
the data types are different. Refer to page 96.
Job 24 Normalize Play Effect
Same as in the PATTERN mode. Refer to page 96.
12. Job