Service manual

RM1x

[210]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)

[211]: Bind Head Tapping Screw-B 3.0X8 MFZN2BL (EP600190)

[212]: Bonding Head Screw-B 3.0X10 MFZN2BL (VQ498000)

4. PN Circuit Board

4-1 Remove the bottom case assembly. (See Proce-

dure 1.)

4-2 Remove the DM circuit board. (See Procedure 2.)

4-3 Remove the FDD assembly. (See Procedure 3.)

4-4 Remove the four (4) screws marked [210], the two

(2) screws marked [212] and the four (4) screws

marked [211]. The shield cover can then be re-

moved. (Fig. 3)

4-5 Remove the four (4) knobs marked [320]. (Fig. 4)

4-6 Remove the twelve (12) screws marked [60]. The

PN circuit board can then be removed. (Fig. 5)

[60]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)

(Fig.5)(Fig. 4)

(Fig.3)

[330]: Knob (V2887900)

[320]: Knob (V2647700)

Rear View

Bottom view