User Manual

9MCP1 (Ver. 5.0 or later) Installation Manual
Connecting the device
Use an Ethernet cable to connect the MCP1, and the device that is controlled via the MCP1, to
a PoE network switch.
If the network switch does not support PoE, connect a PoE injector between the network
switch and the MCP1.
In some cases, the PSE (PoE network switch or PoE injector) might have ports that supply
power and ports that do not supply power. Connect the MCP1 to a port that supplies power.
For details on how to synchronize each device, refer to “ProVisionaire Design User Guide.”
Connections for a small system
Connections for a large system
Computer
MTX3
SWR2100P-10G
Maximum
100 meters
MCP1 MCP1
Computer
DME7
SWR2100P-10G
MCP1
Maximum
100 meters
PC412-DI
SWP1-16MMF
MCP1 MCP1 MCP1