User Manual
d
BAY LINK
This sets the function for linking between multiple bays. White lines connect the linked bays.
(
BAY LINK: Selects layer settings for faders, or settings for linked bays.
(
SENDS ON FADER: SENDS ON FADER on/off and send-destination bus
(
SEND BLOCK: Selects the 12 buses at the send destination when the OVERVIEW screen is selected
(
SHIFT KEY: Turns the [SHIFT] key on/off
(
CH STRIP ENCODERS: Switches the channel strip encoder selection
(
HOME KEY: Saves and recalls [HOME] key settings
(
CUE→SEL: Links the cue operations and channel selection
e
CUE OPERATION MODE field
Switches between cue’s BAY mode and CH mode (“Using the Cue function”(p.413)). In BAY mode, you can select CUE
A, CUE B, or CUE A+B for each bay. In CH mode, you can select CUE A, CUE B, or CUE A+B for each channel.
(
CUE SETTINGS popup button
Press this button to display the window, in which you can configure the cue for each channel in CH mode (“CUE
SETTINGS popup window”(p.420)).
878
User Setup > SURFACE SETTINGS1