User Manual

Yamaha Commercial Audio
Dante-MY16-AUD HA Remote Control Guide
12 www.yamahaproaudio.com
Settings for the Digital Mixer
On the digital mixer, configure the same settings as those for remote-
controlling other external HA equipment. For details, please also refer to the
Owner’s Manual of the applicable digital mixer.
WORD CLOCK Settings
There are three possibilities for configuring the word clock settings of the
system:
• Use Dante as the master clock. This is the best option when there are
multiple consoles in one network.
• Use the console as the master clock. This is a convenient option when
there is only one console in the system.
• Use an external word clock generator as the master clock. This can be
necessary in studios and broadcast environments when there are other
digital audio systems to synchronize to.
Using Dante as the Master Clock
In the Word Clock menu of each mixer, select any slot input in which a Dante-
MY16-AUD card is installed as the clock source. The Dante network will
automatically select a clock master device to keep the whole network in sync.
Using the Console as the Master Clock
In the Word Clock menu of the mixer, select “Internal 48k” as the clock source (this
is the default selection). Open Dante Controller software and select the Clock
Status tab. Set “Slave to External Clock” for just one of the Dante-MY16-AUD
cards that are installed in the mixer. For the same card, check the “Preferred
Master” option, and this card will transmit the word clock to the rest of the network.