manual

12 En
CONNECTIONS
Indoor antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should
provide sufficient signal strength. Connect each antenna correctly to the designated terminals.
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
■ Assembling the supplied AM loop
antenna
■ Connecting the wire of the AM loop
antenna
Plug the power cable into the AC wall outlet after all other
connections are complete.
Connecting the FM and AM antennas
Note
Indoor FM
antenna
(included)
Outdoor AM antenna
Use 5 to 10 m of vinyl-
covered wire extended
outdoors from a window.
Outdoor FM antenna
Ground (GND terminal)
For maximum safety and minimum interference, connect
the antenna GND terminal to a good earth ground. A
good earth ground is a metal stake driven into moist earth.
• The AM loop antenna
should always be connected,
even if an outdoor AM
antenna is connected to this
unit.
• The AM loop antenna
should be placed away from
this unit.
AM loop antenna
(included)
Connecting power cable
To the wall
outlet with the
power cable