User Guide

59
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Voice Element LFO Parameters
Path: v ➞ e ➞ ** (Elmnt) ➞ *^ (LFO)
* Pressing this may not be necessary if the appropriate page has already been called up.
Mute status for each Element (1 - 4).
LFO Delay Time
LFO Wave
LFO Speed
Pitch
Modulation
Depth
Filter
Modulation
Depth
Amplitude
Modulation
Depth
About LFO
The LFO (low frequency oscillator) is a low frequency
waveform that is used to modulate, or regularly waver,
some aspect of the sound. This modulation can be applied
to the level (Amplitude), pitch, or tone (Filter).
The LFO here is separate from the modulation found in the
Common page’s Control menu. (See page 46.) The LFO
modulation here is applied constantly and is not affected by
the controllers (MODULATION wheel, after touch, PITCH
wheel, or Foot Controller).
● Delay Time
Range: 0 — 127
This determines the amount of time before the onset of the
LFO modulation. (This only affects Pitch modulation.)
● Wave
Settings: sawtooth, triangle, sample & hold (S&H)
This determines the particular waveform for the LFO. The
modulation characteristics differ depending on the wave-
form selected. The sample & hold setting produces a
random modulation effect.
● Speed
Range: 0 — 63
This determines the speed of the LFO modulation. Higher
values result in faster modulation.
● Amplitude Modulation Depth (AM)
Range: 0 — 31
This determines how widely the level (Amplitude) is
modulated by the LFO. The higher the value, the greater
the modulation of the sound level .
● Pitch Modulation Depth (PM)
Range: 0 — 63
This determines how widely the pitch is modulated by the
LFO. The higher the value, the greater the pitch modula-
tion.
● Filter Modulation Depth (FM)
Range: 0 — 15
This determines how widely the tone (Filter) is modulated
by the LFO. The higher the value, the greater the tone
modulation.
Voice Edit Mode
Voice Element