Service manual

4-37
POWR
TR
BRAKE
1. Inspect:
• Caliper piston
Scratches/rust/wear
→
Replace the caliper
assembly.
• Caliper cylinder
Wear/scratches
→
Replace the caliper
assembly.
• Caliper body
Cracks/damage
→
Replace.
• Oil delivery passage (caliper body)
Blow out with compressed air.
WARNING
Replace the piston seals and dust seals when-
ever a caliper is disassembled.
BRAKE CALIPER ASSEMBLY
WARNING
• All internal parts should be cleaned only with
new brake fluid.
• Internal parts should be lubricated with brake
fluid when installed.
• Replace the piston seals whenever a caliper is
disassembled.
Recommended brake fluid:
DOT 4
BRAKE CALIPER INSTALLATION
1. Install:
• Brake hose
1
CAUTION:
When installing the brake hose
1
onto the
brake caliper
2
, make sure that the brake pipe
touches the projection
a
on the brake caliper.
T
R
.
.
Union bolt (brake hose):
30 Nm (3.0 m · kg, 22 ft · lb)
1
2
a