User Manual

PSR-S970/S770 Owner’s Manual 91

Microphone/Guitar Input – Using a Microphone or Guitar with the Instrument –

This section covers the Vocal Harmony Effects that can be applied to your voice via the microphone.

1 Connect the microphone to the instrument (page 88).

2 Press the [MIC SETTING/VOCAL HARMONY] button to call up

the MIC/GUITAR SETTING display.

3 Make sure that the [A] (MIC/GUITAR) button is set to ON.

4 Press the [E] (TYPE) button to call up the Vocal Harmony Type

Selection display.

5 Use the TAB [][] buttons to select the VOCAL HARMONY tab.

6 Press one of the [A] – [J] buttons to select the desired Vocal

Harmony type.

To call up the other display pages for further selections, press one of the [1 ] –

[5 ] buttons.

The Vocal Harmony features three different modes which can be selected

automatically by selecting a Vocal Harmony type.

Using Vocal Harmony (PSR-S970)

Icon Mode Descriptions

(Microphone and

man/woman)

Chordal The harmony notes are determined by the chords

you play in the chord section (with [ACMP]

turned on), the left hand section (with [ACMP]

turned off and [LEFT] turned on) or the chord

data of a Song.

(Microphone)

The harmony notes are determined in the same

way as in Microphone above. However, effects

such as Vocal Doubler and PokerPhaser are

applied. Harmony may or may not be applied

depending on the selected type. (If harmony is

not applied, the [4 ] (HARMONY) buttons

in the MIC/GUITAR SETTING display is set to

OFF.)

(Microphone and

keyboard)

Vocoder The microphone sound is output via the notes

you play on the keyboard or via the Song play-

back notes.

Vocoder

Mono

Same as the Vocoder mode basically. In this

mode, only single-note melodies or lines can be

played back (with last-note priority).

12psrs970_en_om.book Page 91 Friday, June 26, 2015 3:33 PM