Owner`s manual

Owner’s Manual

Setting Up

Function Display

In the Function display, you can make detailed settings for this instrument. The Function display appears when the

[FUNCTION] button is pressed. In the display you can use the CATEGORY [<] and [>] buttons to select 60 dif-

ferent function items. Press the CATEGORY button(s) as many times as necessary until the required function

appears, then use the dial or the [-/NO] and [+/YES] buttons to adjust the value of the function as required. To

recall the default value, press the [-/NO] and [+/YES] buttons simultaneously.

All items which can be selected in the Function display are listed in the Panel Button Chart on page 66.

 Move the highlighted Position

In some Function displays, pressing the [EXECUTE] button will move the highlighted position from the current

one to the other one.

 Shortcut

You can jump directly to certain Function displays by holding the related button for longer than a second. The but-

tons are as follows:

• [FUNCTION] button ..............Scale

• [DEMO] button.......................Demo Group

• [ACMP] button .......................Chord Fingering

• [METRONOME] button.........Time Signature-Numerator

• [FREEZE] button....................Freeze Group Setting

• [HARMONY] button..............Harmony Type

• [TOUCH] button.....................Touch Sensitivity

• [DSP] button ...........................DSP Type

This can be particularly handy since such a large number of Functions are available.

Function item

Value